USA ▼
Products > Sound Level Meters > NM102

Low Cost Noise Meter - NM102

Sound Level Meter
Sound Level Meter
Sound Level Meter Meter, Case, Windhshield, Battery Sound Level Display

Price List

NM102
$212.00
Sound Level Meter with Windshield, Case and Battery
In stock

NM102-K
$406.00
Sound Level Meter with Calibrator, Windshield, Case and Battery
In stock

NM100
$195.00
Calibrator and Case for NM102 Sound Level Meter

The delivery price is calculated during checkout based on your location and the goods ordered. Our basic delivery prices are:

Delivery within USA: $20.00 to $40.00

Delivery Service: Five working days*

* For products that are in stock and the order received by midday.

Some products go through a final configuration and calibration before being shipped. If the calibration labs are busy this can add up to two days on to the delivery schedule but guarantees a fresh calibration.

NM102-K
$406.00
Sound Level Meter with Calibrator, Windshield, Case and Battery
In stock

Features

  • Large, clear display with back-light
  • 30 to 130 dB(A) Auto Ranging
  • A and C frequency weighting
  • Fast and Slow time weighting
  • Maximum and Minimum sound level readings
  • Hold button holds the currently displayed level
  • Includes Wind Shield, Carrying Case and Battery

Applications

  • General Purpose Noise Measurement
  • Office Noise
  • Alarm Checks

Overview

This low cost noise meter has been designed for simple noise surveys and sound level checks. Despite its full range of features, it is very easy to use and the large backlit display helps when measuring in poor light conditions.

Due to its auto-ranging feature and simple push-button operation, this noise meter is extremely easy to use. Just switch it on and it is measuring with the most common settings: "A" frequency weighting and "Fast" time response. At the push of a button you can change it to display the "C" weighted sound level or change to "Slow" time response. The large display with back light make this meter ideal for measuring noise levels where the natural light is poor.

Regulations

Please note that for measuring occupational noise to national regulations, you should usually use a Type 2 Integrating Sound Level Meter rather than a simple non-integrating meter such as the NM102. For more advice please visit our Occupational Noise information page.

For any noise monitoring application it is always wise to check whether there are any regulations that state the grade of meter that should be used and define the parameters that the meter should measure.

NM102-K Sound Level Meter and Calibrator

The NM102-K Noise Measurement Kit comes complete with the following items:

  • NM102 Noise Meter
  • NM100 Sound Level Calibrator
  • Wind Shield
  • Hard carrying case for all items
  • Soft case for the sound level meter
  • Batteries for sound meter and calibrator
  • User manual for meter and calibrator

This sound level meter and calibrator combination have been designed to be very quick and easy to use. The hard carrying case protects the meter and calibrator but we also include the soft case so that the meter alone can be carried around without getting damaged.

sound level meter and calibrator
Meter and Calibrator

Before making a measurement, the calibrator is placed over the microphone and switched on to 94 dB(A). Any adjustments can be made automatically by simply pressing two buttons on the sound level meter. The meter calibrates itself.

The calibrator is then removed from the microphone and switched off.

Using the NM102 Noise Meter

The NM102 Noise Meter has been designed to be quick and easy to use. The auto-range feature means that you do not have to select the measurement range before making measurements, which is a problem with most sound level meters. With this meter you just switch on and it starts measuring the "A" weighted, Fast Sound Level, which is ideal for most applications.,The "A" weighted, Fast Sound Level is the parameter that is used for most applications.

Main Buttons

A/CSwitches between "A" weighting and "C" weighting. For more information on these visit our Frequency Weightings page.
Fast/SlowSwitches between "Fast" time weighting and "Slow" time weighting. For more information please visit our Time Weightings page.
HoldHolds the sound level that is currently shown on the meter - freezes the display.
Max/MinShows the maximum or minimum sound level.

Noise Meter Applications

As this meter covers 30 to 130 dB(A) it can be used for many applications, from quiet offices to much more noisy environments. With its auto-ranging feature, it is particularly good for measuring noise that varies from quiet to very loud in a short period of time - a meter with manual range setting cannot do this as you have to stop measuring, change the range and start again.

The NM102 Noise Meter is also very quick and easy to use. If you need to be able to pick the meter up and make a quick measurement, without fiddling with buttons first, then this is likely to be the best choice.

Use the NM102 when you need to:

  • Measure noise levels from quiet (30 dBA) to very loud (130 dBA).
  • Make quick spot-checks of the noise levels.
  • Measure the noise in low-light environments - the large, back-lit display helps.
  • Monitor the maximum or minimum sound levels over short period of time.
  • Checking levels in offices, hospital units and other "low noise" environments.

Any Regulations?

Always check whether there are any regulations that you need to follow when making the noise measurements. If so, the regulations may give a specification of the meter that you need. If you have any doubts please email us for advice.

Occupational Noise Regulations

If you are measuring noise in line with the US OSHA or European Noise at Work regulations (i.e. for hearing protection reasons) then you need to make your assessment using at least a Type 2 Sound Level Meter.

The NM102 Sound Level Meter makes an excellent addition to your noise measurement kit, to keep in the toolbox for making quick checks. However, a true noise survey should be done using a suitable calibrated Integrating sound level meter.

Technical Specifications

Display4 Digit LCD with back light, update rate 0.5 s
IndicatorsLow battery, freq. & time weighting, min/max
BatteryOne 9V battery (supplied)
Battery LifeAbout 50 hours (alkaline battery)
Temp. & Humidity5°C to 40°C, below 80% RH
Dimensions8" x 2.1" x 1.5", 6 ounce (inc. battery)
200 x 55 x 38, 170 g (including battery)

Acoustic Specifications

Resolution / Accuracy0.1dB / ±1.5 dB (ref 94 dB @ 1 kHz)
Frequency Range31.5 Hz to 8 kHz
Level Range30 to 130 dB(A), 35 to 130 dB(C)
Frequency WeightingA and C
Microphone1/2" electret condenser
Time WeightingFast (125 ms) and Slow (1 s)
Dynamic Range50 dB