The SoundEar II Data Logging Noise Warning Sign can be mounted on a wall or other vertical surface using a single screw or hook - like mounting a picture. The trigger sound level is set using a dial on the back.
The data logging module can be unplugged from the sign and plugged into a computer's USB port. The software downloads the noise measurements and displays graphs of sound level over time.
Industrial Noise Sign features:
Rental Kit Includes:
Rental Price Includes
As well as providing an immediate warning of high noise levels, the data logging version of the SoundEar Industrial Noise Sign includes a module that stores the sound level measurements. The module can then be plugged in to a computer to download the measurements.
The noise limit can be set within the range of 40 to 115 dB(A), adjusted in 5 dB steps using the dial hidden on the back of the sign. The yellow lights warn when the level is getting close to the limit and the red light shows the limit has been exceeded.
The SoundEar II Industrial can be installed in almost any indoor environment where employees need to be warned of high noise levels and to take action.
1. Set the sound level using the dial on the back.
2. Hang the sign on a single screw on the wall.
3. Connect the power.
|Red Light Limit||40 to 115 dB(A)|
|Yellow Light||5 dB below red limit|
|Deviation||± 3 dB|
|Power Supply||110 V or 240 V AC|
|Power Consumption||Approx. 3W|
|Dimensions||265 x 205 x 46 mm, 1.5 kg|
|Weightings||Freq: A, Time: Slow|