The standard EM2010/G and EM2010/AG Kits includes the following items:
The following items are available as options for the EM2010 Environmental Noise Monitor. Those marked [Factory Option] must be carried out at the time of manufacture, or the equipment will have to be returned for upgrade. Other options can be added at any time.
The standard EM2010/G meets the sound level meter standard IEC 61672 to Class 2 and ANSI S1.4 to Type 2. If your regulations demand the use of a Class 1 or Type 1 system then you should add EM2010UPG1 option to your order.
As the whole EM2010 measurement chain meets Class 1, the main change is the microphone capsule. Operating and installing the unit are identical to the Class 2 version.
Order code EMENC is for the weatherproof outdoor box, which can be wall mounted (brackets included) or pole mounted (see pole mount option below).
External dimensions approx: 300 x 200 x 150mm.
When ordered at the same time as the noise monitor, the EM2010 will come installed inside the case. All you need to do is mount the box on a wall, wire the microphone in and provide the electrical power wiring.
A 1.5m mast is also included for mounting the microphone.
Order code EMENCPOLE is for a pole mounting bracket for the EMENC enclosure listed above.
This bracket will enabled you to mount the weatherproof enclosure on a lamp post or similar pole. In the example here the box is mounted on a lamp post with the microphone mounted on the side of the EMENC box.
This option is just for the bracket, you also need the EMENC enclosure.
For a positive identification of the noise source there is no better way than to listen to a recording. The EM2010/AG can be set to record the audio when preset conditions are met (trigger levels, etc). The audio is automatically uploaded to the server so you can listen when viewing the reports.
When you order the EM2010/AG Environmental Noise Monitor the price includes the mobile connection and reporting contract for the first year. This costs more due to the much larger amount of data involved.
The EM2010 is supplied with a 3m microphone cable. This can be extended to 10m using standard 50 ohm RG-174 coaxial cable.
Environmental Noise Monitor with GSM link and web access to measurements.